';

Ash solid flooring

        Solid ash floor boards – a natural flooring that consists of particular elements(ash planks) with width of 120 – 160mm and length of 500 – 2000mm. Edge and plank ends of such boards have the “tongue-groove” profile, which allows you to combine them into solid flooring.

        Due to the strength characteristics of ash, you have an opportunity to get solid and durable flooring with bright colour gamut, which will bring a sense of space in your dwelling.

        We realize that solid wood flooring is primarily a long-term and costly investment. Therefore, our company manufactures products with inherent quality and passion. Keeping in mind care and exploitation conditions of our products,we ensure that you will proudly be able to pass such floor into next generation.

Widths 120 – 160mm

Type of wood Quality Thickness, mm Width, mm Length, mm
Ash Natur 20 120, 140, 160 500 – 2000

Classification of the grade for width 120-160mm:

• Natur – mixed wood sawing was used during the production. Front side has a uniform design. Allowed: small color changes within a timber tone, kernel with no restrictions without sharp color changes, light knots up to 20 mm, small olive blotches. Not allowed: big color contrast, rot, wormholes, mechanical damage.

You can not make up your mind or you do not know if it is worth it ? After visiting “Product characteristics” or our “Gallery” you are unlikely to remain unsure.

* – All products have been grinded by grain 80-100. Edges can be sharp or with bevels.

* – Our production is shown in the photo above.

Widths 120 – 160mm

Classification of the grade for width 120-160mm:

• Natur – mixed wood sawing was used during the production. Front side has a uniform design. Allowed: small color changes within a timber tone, kernel with no restrictions without sharp color changes, light knots up to 20 mm, small olive blotches. Not allowed: big color contrast, rot, wormholes, mechanical damage.

You can not make up your mind or you do not know if it is worth it ? After visiting “Product characteristics” or our “Gallery” you are unlikely to remain unsure.

* – All products have been grinded by grain 80-100. Edges can be sharp or with bevels.

* – Our production is shown in the photo above.

preloader