';

Chevron flooring

Chevron flooring (French parquet, Hungarian parquet) – planks of parquet or solid floor boards with the same length, which are stacked at 35, 45 or 60degrees angle to each other. In some way, this installation pattern can be considered as continuation of Herringbone pattern.

Despite the fact that the oblique cut of the plank end of the Chevron flooring demands more: effort, technological process and precision of the geometry, all this in particularly makes this method more expressive, elegant and provides much larger diversity of the installation line.

The first examples of such pattern can be found in the end of the 16th century in the mansions of the French bourgeoisie, generally Chevron flooring was used in the old French castles and royal palaces of that time.

Although, it has been already five centuries since this pattern was set up, Chevron flooring is still strongly associated with “Castle flooring”, and with Paris apartments of the 19th century, and also with country-side chalet(especially when combined with a fireplace). Undoubtedly, we can say that nowadays “French parquet” – is the most elegant and stylish installation pattern for parquet and solid wood flooring.

Chevron flooring from the Stenyk company – is a modern version of classical “French flooring”, with width 70 – 160mm and 60 and 45 degrees angle. Be sure, that flooring from our company will be provided with geometry of the exceptional precision, what will guarantee fast and flawless installation process.

45°

60°

Width 160mm

Engineered flooring

Type of wood Quality Thickness, mm Width, mm Length, mm
Oak Select 12/3, 16/4, 21/6 160 620 (45°); 690 (60°);
Nature 12/3, 16/4, 21/6 160 620 (45°); 690 (60°);
Rustic A 12/3, 16/4, 21/6 160 620 (45°); 690 (60°);
Rustic B 12/3, 16/4, 21/6 160 620 (45°); 690 (60°);

Classification of the grades for width 160mm:

• Select – the highest grade of wood, produced by mixed wood sawing. Light knots  up to 5mm and cells up to 3mm are allowed. The front side has a uniform design without flat heart-shaped strips. The color is even, typical of that type of timber without big color changes, any blotches and any custom colors.

• Natur – products of this grade of wood were manufcatures by means of  mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 15mm in diameter, black knots – up to 5mm. Slight changes in the color within a timber tone are allowed.

• Rustic A – products of this grade of wood were manufcatures by means of  mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 30mm in diameter, black knots – up to 15mm. Average color variation is allowed

• Rustic B – mixed wood sawing was used during the production. Allowed: big color changes on the front side; healthy knots: light – up to 60mm and dark with a diameter up to 25 mm, partly rotten not pass – through knots, kernel is possible, small cracks that do not extend to the edge. Color is typical of that type of the wood. Big color changes and color variations are allowed. Not allowed through holes, wormholes, over humidity, sapwood, through cracks. 

Width 70mm

Type of wood Quality Thickness, mm Width, mm Length, mm
Oak Select 22 70 410 (45°); 440 (60°);
Nature 22 70 410 (45°); 440 (60°);
Rustic 22 70 410 (45°); 440 (60°);

Classification of the grades for width 70mm:

• Select – the highest grade of wood with dense structure without knots and sapwood, produced by mixed wood sawing. Front side has a uniform design without flat heart – shaped strips. The color is solid, typical of that type of wood without sharp color differences, blotches and any untypical colors.

• Natur – this grade of wood was produced by mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 5mm in diameter, black knots – up to 3mm. Slight changes in the color within a timber tone are possible.

• Rustic – mixed wood sawing was used during the production. Front side has a uniform design. Allowed: big color changes – on the front side; sapwood – no more than 30% of the total area; healthy knots: light and dark with a diameter up to 10 mm. Color is typical for that type of the wood.

Width 120mm

Type of wood Quality Thickness, mm Width, mm Length, mm
Oak Select 22 120 460 (45°); 510 (60°);   660 (45°); 710 (60°);
Nature 22 120 460 (45°); 510 (60°);   660 (45°); 710 (60°);
Rustic 22 120 460 (45°); 510 (60°);   660 (45°); 710 (60°);

Classification of the grades for width 120mm:

• Select – the highest grade of wood, produced by means of mixed wood sawing. Light knots  up to 3mm and cells up to 1mm are allowed. The front side has a uniform design without flat heart – shaped strips. The color is even, typical of that type of timber without big color changes, any blotches and any custom colors.

• Natur – this grade of wood was produced by mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 5mm in diameter, black knots – up to 3mm. Slight changes in the color within a timber tone are possible.

• Rustic – mixed wood sawing was used during the production. Allowed: big color changes on the front side; sapwood – no more than 30% of the total area; healthy knots: light and dark with a diameter up to 10 mm. Color is typical of that type of the wood. Big color changes and color variations.

Widths 140 – 160mm

Type of wood Quality Thickness, mm Width, mm Length, mm
Oak Select 20 140 640 (45°); 700 (60°);
Nature 20 140 640 (45°); 700 (60°);
Rustic 20 140 640 (45°); 700 (60°);
Type of wood Quality Thickness, mm Width, mm Length, mm
Oak Select 20 160 620 (45°); 690 (60°);
Nature 20 160 620 (45°); 690 (60°);
Rustic 20 160 620 (45°); 690 (60°);

Classification of the grades for width 140 – 160mm:

• Select – the highest grade of wood, produced by mixed wood sawing. Light knots  up to 5mm and cells up to 3mm are allowed. The front side has a uniform design without flat heart-shaped strips. The color is even, typical of that type of timber without big color changes, any blotches and any custom colors.

• Natur – products of this grade of wood were manufcatures by means of  mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 30mm in diameter, black knots – up to 15mm. Slight changes in the color within a timber tone are allowed.

• Rustic – mixed wood sawing was used during the production. Allowed: big color changes on the front side; healthy knots: light – up to 60mm and dark with a diameter up to 25 mm, partly rotten not pass – through knots, kernel is possible, small cracks that do not extend to the edge. Color is typical of that type of the wood. Big color changes and color variations are allowed. Not allowed through holes, wormholes, over humidity, sapwood, through cracks.

You can not make up your mind or you do not know if it is worth it ? After visiting “Product characteristics” or our “Gallery” you are unlikely to remain unsure.

* – All products have been grinded by grain 80-100. Edges can be sharp or with bevels.

Width 160mm

Engineered flooring

Classification of the grades for width 160mm:

• Select – the highest grade of wood, produced by mixed wood sawing. Light knots  up to 5mm and cells up to 3mm are allowed. The front side has a uniform design without flat heart-shaped strips. The color is even, typical of that type of timber without big color changes, any blotches and any custom colors.

• Natur – products of this grade of wood were manufcatures by means of  mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 15mm in diameter, black knots – up to 5mm. Slight changes in the color within a timber tone are allowed.

• Rustic A – products of this grade of wood were manufcatures by means of  mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 30mm in diameter, black knots – up to 15mm. Average color variation is allowed

• Rustic B – mixed wood sawing was used during the production. Allowed: big color changes on the front side; healthy knots: light – up to 60mm and dark with a diameter up to 25 mm, partly rotten not pass – through knots, kernel is possible, small cracks that do not extend to the edge. Color is typical of that type of the wood. Big color changes and color variations are allowed. Not allowed through holes, wormholes, over humidity, sapwood, through cracks.

Width 70mm

Parquet flooring

Classification of the grades for width 70mm:

• Select – the highest grade of wood with dense structure without knots and sapwood, produced by mixed wood sawing. Front side has a uniform design without flat heart – shaped strips. The color is solid, typical of that type of wood without sharp color differences, blotches and any untypical colors.

• Natur – this grade of wood was produced by mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 5mm in diameter, black knots – up to 3mm. Slight changes in the color within a timber tone are possible.

• Rustic – mixed wood sawing was used during the production. Front side has a uniform design. Allowed: big color changes – on the front side; sapwood – no more than 30% of the total area; healthy knots: light and dark with a diameter up to 10 mm. Color is typical for that type of the wood.

Width 120mm

Solid wood flooring

Classification of the grades for width 120mm:

• Select – the highest grade of wood, produced by means of mixed wood sawing. Light knots  up to 3mm and cells up to 1mm are allowed. The front side has a uniform design without flat heart – shaped strips. The color is even, typical of that type of timber without big color changes, any blotches and any custom colors.

• Natur – this grade of wood was produced by mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 5mm in diameter, black knots – up to 3mm. Slight changes in the color within a timber tone are possible.

• Rustic – mixed wood sawing was used during the production. Allowed: big color changes on the front side; sapwood – no more than 30% of the total area; healthy knots: light and dark with a diameter up to 10 mm. Color is typical of that type of the wood. Big color changes and color variations.

Widths 140 – 160mm

Solid wood flooring

Classification of the grades for width 140 – 160mm:

• Select – the highest grade of wood, produced by mixed wood sawing. Light knots  up to 5mm and cells up to 3mm are allowed. The front side has a uniform design without flat heart-shaped strips. The color is even, typical of that type of timber without big color changes, any blotches and any custom colors.

• Natur – products of this grade of wood were manufcatures by means of  mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 30mm in diameter, black knots – up to 15mm. Slight changes in the color within a timber tone are allowed.

• Rustic – mixed wood sawing was used during the production. Allowed: big color changes on the front side; healthy knots: light – up to 60mm and dark with a diameter up to 25 mm, partly rotten not pass – through knots, kernel is possible, small cracks that do not extend to the edge. Color is typical of that type of the wood. Big color changes and color variations are allowed. Not allowed through holes, wormholes, over humidity, sapwood, through cracks.

You can not make up your mind or you do not know if it is worth it ? After visiting “Product characteristics” or our “Gallery” you are unlikely to remain unsure.

* – All products have been grinded by grain 80-100. Edges can be sharp or with bevels.

preloader