Oak parquet flooring

            Oak parquet flooring – planks of solid wood with width of 70mm and length of 250 – 500mm. Edge and planks end have the “tongue-groove” profile, which allows you to combine them into solid parquet flooring.

            Due to variety of oak characteristics, you have an opportunity to get solid and resistant to temperature influences flooring with dark colour gamut, which certainly will create feelings of warmth and comfort in your dwelling. You should keep in mind that parquet – not just a wooden floor, is prestige and quality, which will help you to immerse into luxury and elegance of the past century bourgeois , and by virtue of a large number of installation styles, such as: “fishbone”, “decking”, “cubical” and others, you can considerably diversify your dwelling’s floor.

            We realize that flooring is primarily a long-term and costly investment, so our company manufactures products with inherent quality and passion. Keeping in mind care and exploitation conditions of our products, we ensure that you will proudly be able to pass such floor into next generation.

Width 70mm


Type of wood Quality Thickness, mm Width, mm Length, mm
Oak Select 22 70 250, 300, 350, 420, 500
Nature 22 70 250, 300, 350, 420, 500
Rustic 22 70 250, 300, 350, 420, 500

Classification of the grades for width 70mm:

• Select – the highest grade of wood with dense structure without knots and sapwood, produced by mixed wood sawing. Front side has a uniform design without flat heart – shaped strips. The color is solid, typical of that type of wood without sharp color differences, blotches and any untypical colors.

• Natur – this grade of wood was produced by mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 5mm in diameter, black knots – up to 3mm. Slight changes in the color within a timber tone are possible.

• Rustic – mixed wood sawing was used during the production. Front side has a uniform design. Allowed: big color changes – on the front side; sapwood – no more than 30% of the total area; healthy knots: light and dark with a diameter up to 10 mm. Color is typical for that type of the wood.

You can not make up your mind or you do not know if it is worth it ? After visiting “Product characteristics” or our “Gallery” you are unlikely to remain unsure.

* – All products have been grinded by grain 80-100. Edges can be sharp or with bevels.

* – Our production is shown in the photo above.

Width 70mm


Classification of the grades for width 70mm:

• Select – the highest grade of wood with dense structure without knots and sapwood, produced by mixed wood sawing. Front side has a uniform design without flat heart – shaped strips. The color is solid, typical of that type of wood without sharp color differences, blotches and any untypical colors.

• Natur – this grade of wood was produced by mixed wood sawing. Front side has a uniform design. Big color contrast, sapwood, rot, wormholes, mechanical damage are not allowed. Knots are allowed: sound knots – up to 5mm in diameter, black knots – up to 3mm. Slight changes in the color within a timber tone are possible.

• Rustic – mixed wood sawing was used during the production. Front side has a uniform design. Allowed: big color changes – on the front side; sapwood – no more than 30% of the total area; healthy knots: light and dark with a diameter up to 10 mm. Color is typical for that type of the wood.

You can not make up your mind or you do not know if it is worth it ? After visiting “Product characteristics” or our “Gallery” you are unlikely to remain unsure.

* – All products have been grinded by grain 80-100. Edges can be sharp or with bevels.

* – Our production is shown in the photo above.