';

Parquet and solid wood flooring characteristics

 

 

 

solid-wood-flooring-profile

A – the main wearable layer;

B – 4-sides bevel, 1.5 x 1.5mm size;

C – “tongue-groove” profile;

D – compensative grooves.

Overall photos of the grades, unfinished (widths 140-240mm)

Select

Natur

Rustic

  • Stenyk’s parquet and solid wood flooring meet EU standards EN 13226!
  • Moisture level of our products is in range of 8 – 10%.
  • The geometry of the manufactured product is ± 0,2 mm.

Qualitative characteristics of the parquet and solid wood flooring

Production type Type of wood Quality

Width,

mm 

 Qualitative characteristics
Wood grain Sapwood, rot, wormholes Pith Non-through cracks Tobacco knots Knots Color variation
Sound Unsound
Parquet Oak Select 70 Mixed Not permitted Not permitted Not permitted Not permitted ∅ ≤ 1mm Without sharp color variation
Natur 70 Mixed Not permitted Not permitted Not permitted Not permitted ∅ ≤ 5mm ∅ ≤ 3mm Slight variation of the color within a timber tone
Rustic 70 Mixed Partially permitted Not permitted Not permitted Not permitted ∅ ≤ 10mm Considerable color variation(typical for this wood type)
Parquet Ash Select 70 Mixed Not permitted Not permitted Not permitted Not permitted Not permitted Slight variation of the color within a timber tone
Natur 70 Mixed Not permitted Not permitted Not permitted Not permitted ∅ ≤ 5mm ∅ ≤ 3mm Slight variation of the color within a timber tone
Rustic 70 Mixed Not permitted Not permitted Not permitted Not permitted ∅ ≤ 10mm Considerable color variation(typical for this wood type)
Solid floor boards Oak Select 120 Mixed Not permitted Not permitted Not permitted Not permitted ∅ ≤ 3mm ∅ ≤ 1mm Without sharp color variation
Natur 120 Mixed Not permitted Not permitted Not permitted Not permitted ∅ ≤ 5mm ∅ ≤ 3mm Slight variation of the color within a timber tone
Rustic 120 Mixed Partially permitted Not permitted Not permitted Not permitted ∅ ≤ 10mm Considerable color variation(typical for this wood type)
Select 140 – 160 Mixed Not permitted Not permitted Not permitted Not permitted ∅ ≤ 5mm ∅ ≤ 3mm Without sharp color variation
Natur 140 – 160 Mixed Not permitted Not permitted Not permitted Not permitted  ∅ ≤ 30mm  ∅ ≤ 15mm Slight variation of the color within a timber tone
 Rustic  140 – 240 Mixed Not permitted Permitted Permitted Permitted  ∅ ≤ 60mm  ∅ ≤ 30mm Considerable color variation(typical for this wood type)
Solid floor boards Ash Natur 120 – 160 Mixed Not permitted Not permitted Not permitted Not permitted  ∅ ≤ 20mm  ∅ ≤ 10mm Slight variation of the color within a timber tone
  • Stenyk’s parquet and solid wood flooring meet EU standards EN 13226!
  • Moisture level of our products is in range of 8 – 10%.
  • The geometry of the manufactured product is ± 0,2 mm.

Qualitative characteristics of the parquet and solid wood flooring

preloader